Work with data
Today, the Internet is gaining more and more popularity, and the word "site" has firmly entered our vocabulary. The last time, two more have constantly gone for a pen with…

Continue reading →

How to hack a site?
To begin with, we will determine that in this article I in no way urge anyone to hack someone’s Internet resources using the methods described below. The main goal of…

Continue reading →

How to write the operating system to disk. The exact instructions.
It happens that you need to write the operating system (for example, Windows 7) to disk. After all, the operating system should always be in the home disk collection, because…

Continue reading →

How to connect multiple computers to the Internet through one

It all started with the fact that I connected to the regional fishing network. The speed of 100Mbit was very impressive and pleasantly pleased. The Internet was indescribably bright (especially when you consider that I used to sit on a modem connection). But it’s a bad luck, I rarely sit on a stationary computer, as I got a laptop and now I do all the work on it. Conveniently, the laptop is always with you both at home and at work. The task was to connect the laptop to the Internet through a stationary computer.

The fact is that the main mechanism for identifying users in regional networks is identification by the MAC address of the network card. And if I disconnect the stationary computer from the provider’s network and connect a laptop in its place, I get a “turnaround” from the gate, since the network card on the laptop has a different (unknown to the provider) MAC address. It was possible to do the substitution of this address, but this is not entirely legal, but it was possible to configure access to the Internet through an existing desktop computer, which I did.

The idea is to connect to an existing Internet connection (in my case it’s a local area network of the provider, but it can be anything – an ADSL connection, broadband access via cable TV network, etc., in the flesh to a dial-up dial-up connection), connect my local network (it can be one computer or a local office or company local network on several computers). In my case, I connected one of my laptops, but if I need to expand the number of computers on the local network and have Internet access, this will not become a big problem. But this is the task of building a local network.

For this, a computer that acts as a gateway between networks (internal and external Internet) must have one network card to connect to the Internet, the second to connect to the internal local network. Such a computer is called a “router — router,” because it routes traffic (information-data) between the two networks.

Piece of iron
I started with the hardware, as this is the first thing that needed to be completed. A second network card was installed in the stationary computer in order to connect to it an internal local area network (consisting of one of my laptops;). Then I connected the laptop with a straight (cross-over) cable to the second network card and proceeded to configure it. Setting up the connection of two computers to a network is described in this article, “How to Connect Two Computers to a Network,” so I won’t focus on this, let’s move on to how to make the Internet for everyone.

Network Settings on the Gateway Computer

Press the “Start” button and go to the “Control Panel”. We select the “Network Connections” shortcut and in the window that appears we find the “Local Area Connection” shortcut that appears, right-click on it and select “Properties” and in the window that appears, go to the “Advanced” tab.

On this tab, we find and boldly check the box next to “Allow other network users to use the Internet connection of this computer” and click “OK.” After that, Windows will inform you that the IP address 192.168.0.1 is installed on this network card and the DHCP service is enabled.

Network settings on the client computer

In principle, after that you can safely turn on another computer and put it in the IP address setting field “Get IP address automatically”, but you can also set the IP address parameters yourself, but they must be on the same subnet as the main gateway (IP address 192.168 .0.1 in our case, and for subscriber computers, the IP address from 192.168.0.2 to 192.168.0.255). The only thing you will have to specify is the “Main Gateway” through which the subscriber computer will go online (by default, if we did not change it on the main computer, the IP address of the main gateway is 192.168.0.1).

After that, click “OK” and launch Explorer, enter the address that interests you on the Internet and wait for the download. For ICQ, E-mail, you do not need to configure anything additionally; it works great with the default settings.

But I would like to focus your attention on the fact that it is desirable to immediately put some kind of firewall in order to protect yourself from unwanted guests and try to restrict them to some users or the services available to them.

This solution is suitable for a home or a very small company or a very small number of computers on the network, since it has practically no monitoring and control tools, and for the Internet it is important. For organizations and companies in general, in principle, it is better to use other services, hardware-software for solving these problems.

Computer jargon - a malignant tumor
Without language, communication between people would be impossible. Regardless of what first comes to mind when mentioning the word "language", the first and second meanings will be true. But certainly…

...

Internet
Corbina Telecom, the Russian universal telecom operator, has launched the Internet2 project in Moscow, which will result in the union of Corbina Telecom customers - both those already working with…

...

What to look for when choosing a laptop
The laptop has already moved from the category of luxury to the category of necessary things, just like a mobile phone once. What should I look for when buying a…

...

How to hack a page in a social network in contact?
This informative article in contact hacking can be perceived differently. As a guide for beginners, to help participants in the VKontakte project, or simply as a guide. However, it cannot…

...